IOGEAR Wireless 4K @ 30Hz Video Extender with Local Pass-through
- Place your 4K TV nearly anywhere without the restrictions of HDMI cable lengths
- Stream wireless 4K audio & video up to 150 feet* to a bedroom or patio
- Setup two 4K TVs to share your 4K video content in a second location at the same time:
- Transmit wireless video content from your Blu-ray player, DVR/cable box or other video sources
- Enjoy stunning wireless 4K Ultra HD video resolutions (3840 x 2160)
- IR remote control extender allows video source control from second TV
- Keep home theater electronic devices neatly out-of-sight
- No software or driver installation needed
- No Wi-Fi network required
- HDMI 1.4 and HDCP 2.2 compliant
- H.264 Video compression with low latency (< 200ms)
- Plug-N-Play solution
*Distances may vary depending on environment. Solid and non-porous materials such as steel, concrete, brick and glass (varies depending on coating and thickness) may cause shorter viewing distances or loss of signal. Line of sight is recommended for optimal performance.
Stream Wireless Audio and Stunning 4K Video up to 150 Feet
Create a completely customized setup in minutes, and transmit your favorite movies, sports, and videos within your home. IOGEAR's Wireless 4K Video Extender takes wireless home entertainment set-ups to the next level of connectivity with flexibility and convenience. Capable of streaming 4K content along with stereo audio up to 150 feet* away with less than 200 Milliseconds of latency.
Hang Your TV Nearly Anywhere Without Wires
Have you ever wanted to hang your TV on your patio, or the living room wall, but dreaded the idea of exposed wires or added construction? The Wireless 4K Video Extender is the ideal solution, as it allows you to "cut the cord" and keep your sources out of sight. The configuration possibilities and uses for this solution are endless. Setup your A/V equipment in a media closet and transmit wirelessly to your TVs in the living room, patio, garage or just about anywhere in your home.
Control Your Devices From Another Room
Use your source device remotes to control your Blu-ray player, DVR/cable box, A/V receiver or media streaming devices such as Apple® TV and control them from wherever you're watching, with the IR pass-through feature. Hide your equipment in one location, while controlling them as if they were in the same room.
* Ideally best performance is obtained using line-of-sight. Distances may vary depending on environment. Solid and non-porous materials such as steel, concrete, brick and glass (varies depending on coating and thickness) may cause shorter viewing distances or loss of signal.
|Input||Transmitter: 1 x HDMI|
|Ouput||Receiver: 1 x HDMI|
|Resolution||480p, 576p, 720p, 1080i, 1080p @ 60Hz, 2160p @ 30Hz|
|Display Output||HDMI 2.0, HDCP 2.2|
|Transfer Rate||Max 10.2 Gbps|
|Video Streaming||H.264 <200ms Latency|
|Frequency||5 ~5.8 GHz|
|Power||5V / 2A|
|Dimensions / Weight||4.72 in x 3.15 in x 0.91 in / 0.4 lb x 2|
1 x Wireless HDMI transmitter
1 x Wireless HDMI receiver
2 x HDMI Cables
2 x Power Adapters
1 x IR Extension Cable
1 x IR Blast Cable
1 x Quick Start Guide